Belden, Colorado
Showing
61 - 66
of 66
, query time: 0.01s
61) Cap lamp room
Format:
Image
Berniece Chadwick, Alberta Limatta, and Ella Burnett with Hawkeye and Jean Flaherty behind them in the cap lamp room. The belts visible on Berniece and Ella hold a battery pack on the back with a power cord attaching to the lamp. Each lamp had 2 filaments so that if one burned out, the power could be switched to the second.
62) Mantrip
Format:
Image
Loading up for transportation to lower levels in the mine. The 16-10 incline goes down to the 18 level (at one time it went all the way to the 24 level). Transporting people was called a mantrip.
In the front seat are Terry Pierson, Ella and Pete Burnett. Victor Pierson is standing at left in the yellow helmet.
63) Cap Lamp Room
Format:
Image
From left, Bill Burnett, Hawkeye (Gordon) Flaherty, and Ella Burnett are standing in front of cap lamp units at 16 level in the Gilman mine. Alberta Limatta is at far right.
The shaft house had a 2 cage lift system, taking miners between levels. It could work with one cage going up and the other down, or with just one isolated cage moving. Cap lamps were put on before going into the mine and returned upon coming out.
Format:
Image
Harold Steinmeyer (left) and Bill May in the compressor room at Belden. Prior to the electrical power plant at Gilman, much of the electricity for the mine (compressors) was supplied by the use of Pelton wheels (turbines) powered by the water from Fall Creek at Belden.
65) Belden Tram
Format:
Image
The tram from Gilman (at the top) to the Belden railroad siding at the bottom of Eagle River Canyon. Men are standing around the base of the tram, next to the railroad tracks.
Format:
Image
Drills and lathes in the repair area. Welders and machinists were employed by New Jersey Zinc to maintain and recycle equipment. During the 1950s, there were three shifts working each day to maintain production levels.
